Дополнительное Руководство для Spectra Logic spectra t120
10
Precautions
Safety and Handling Precautions
Crated Library
The Spectra T950 library is shipped in two separate crates: one for the library frame
and one for the library components. When you order a library cascade, each frame
of the cascade is shipped in a separate crate, and the components for each frame
are shipped in separate crates to match. If, for example, you ordered a three-frame
library cascade, you would receive a total of six crates.
and one for the library components. When you order a library cascade, each frame
of the cascade is shipped in a separate crate, and the components for each frame
are shipped in separate crates to match. If, for example, you ordered a three-frame
library cascade, you would receive a total of six crates.
The crated library can weigh from approximately 925 pounds (426 kg) to
approximately 1285 pounds (583 kg). This weight is calculated by adding the
approximate 800 pounds (363 kg) of library chassis and the approximate 125
pounds (57 kg) of the crate.
approximately 1285 pounds (583 kg). This weight is calculated by adding the
approximate 800 pounds (363 kg) of library chassis and the approximate 125
pounds (57 kg) of the crate.
Crated Components
The crated components can weigh up to approximately 325 pounds (148 kg). This
weight is calculated by adding the approximate 200 pounds (91 kg) of components,
TeraPack cases, and media, plus the approximate 125 pounds (57 kg) of the crate
itself. The weight varies, of course, depending on how many TeraPack cases, power
supplies, and controllers have been ordered for installation in the library, as well as
how much media was ordered.
weight is calculated by adding the approximate 200 pounds (91 kg) of components,
TeraPack cases, and media, plus the approximate 125 pounds (57 kg) of the crate
itself. The weight varies, of course, depending on how many TeraPack cases, power
supplies, and controllers have been ordered for installation in the library, as well as
how much media was ordered.
Warning:
Exercise extreme care when moving the library crate and
components crate. A forklift is required to move the crates on a
level surface. A stair crawler or other special equipment that can
handle the weight of the crates must be used to traverse
stairways.
components crate. A forklift is required to move the crates on a
level surface. A stair crawler or other special equipment that can
handle the weight of the crates must be used to traverse
stairways.
Installed Library
An installed single-frame library can weigh up to approximately 2,156 pounds (978
kg). This weight accounts for the approximate 800 pounds (363 kg) of library
chassis plus the approximate weight of all installed components. The weight varies,
of course, depending on the number of installed drives, controllers, power supplies,
etc. By adhering to the maximum weight specification, however, your site will be
prepared to handle the weight of the library at full capacity. For additional
information about the weight of multiple-frame T950s, refer to Cascade Weight on
page 20.
kg). This weight accounts for the approximate 800 pounds (363 kg) of library
chassis plus the approximate weight of all installed components. The weight varies,
of course, depending on the number of installed drives, controllers, power supplies,
etc. By adhering to the maximum weight specification, however, your site will be
prepared to handle the weight of the library at full capacity. For additional
information about the weight of multiple-frame T950s, refer to Cascade Weight on
page 20.
Once loaded with all of its tape drives, QIPs, TeraPack cases, and media, the
installed library should not be moved. If it must be moved, contact Spectra Logic
Technical Support for recommendations.
installed library should not be moved. If it must be moved, contact Spectra Logic
Technical Support for recommendations.