Release Note для Spectra Logic spectra t120

User Guide Updates — Configuring and Using Encryption

Release Notes 

90940002

After creating an encryption key, you can assign it to one or more library 
partitions. If a partition can support encryption, the encryption choices that 
display and are available depend on the hardware assigned to the 
partition. Possible choices are:
ƒ No encryption
ƒ QIP-based encryption
ƒ LTO-4 drive-based encryption

Use the following steps to assign a key to a partition and encrypt all data 
sent to the partition:

1. Log in as a superuser, then select Security > Encryption. The 

Encryption User Login screen displays. 

2. Enter the encryption password, then select OK. 

3. Select Configuration > Partitions. The Shared Library Services screen 

displays.

4. Select New to add a partition, or select Edit to modify the settings for an 

existing partition.

5. Navigate through the partition configuration screens by selecting Next 

until the Encryption screen displays. 

The Encryption screen lets you enable encryption features for the 
partition. It only displays if you are logged into the encryption 
application and have already created an encryption key as described in 

.

Depending on whether you want to use an encryption-enabled F-QIP 
or a encryption-capable tape drive to perform the data encryption, 
select the desired encryption settings as described in the following 
sections.
ƒ

ƒ