Release Note для Spectra Logic spectra t120
Assigning the Encryption Key to a Partition
December 2008
Spectra T950 Library
133
Enable Encryption Using an F-QIP
1. From the Chambers and Drives screen in the partition configuration
sequence, select Next. The Encryption screen displays.
Note:
If the partition can support encryption, the available encryption
choices depend on the hardware assigned to the partition.
choices depend on the hardware assigned to the partition.
Note:
The encryption performed by encryption-enabled LTO-4 tape
drives is not compatible with the encryption performed by an
encryption-enabled F-QIP.
drives is not compatible with the encryption performed by an
encryption-enabled F-QIP.
If an encryption-enabled F-QIP and an encryption-capable
LTO-4 drive are in the same partition, you must choose one type
of encryption or the other. You cannot use both types in the same
partition.
LTO-4 drive are in the same partition, you must choose one type
of encryption or the other. You cannot use both types in the same
partition.
2. Select select QIP-based Encryption.
3. To reserve a portion of the media at the beginning tape for unencrypted
data, select Enable Clear File at BOT.
If you choose this option, the tape headers are unencrypted so that any
compatible drive can read the header information on an encrypted
tape. Using unencrypted headers is a useful option for sites with a large
number of tapes to manage.
compatible drive can read the header information on an encrypted
tape. Using unencrypted headers is a useful option for sites with a large
number of tapes to manage.
4. Navigate through the remaining partition configuration screens by
selecting Next.
5. When you reach the Save Partition screen, select Save and proceed as
described in
.
Figure 72 The Encryption screen for QIP-based
encryption.
encryption.