Release Note для Spectra Logic spectra t120
Creating a New Data Partition
December 2008
Spectra T950 Library
97
Configure the Drives and Chambers for the Partition
1. After you choose the robotic control path, select Next. The Chambers
and Drives screen displays.
2. Enter the following information in the Chambers and Drives screen:
Storage Chambers – The number of storage chambers assigned to
the storage pool for this partition.
EE Chambers – The number of chambers assigned to the entry/exit
pool for this partition.
Note:
For each partition configured in the library, you must designate a
minimum of one chamber for the storage pool and one chamber
for the entry/exit pool.
minimum of one chamber for the storage pool and one chamber
for the entry/exit pool.
Drives – Select the drives to be dedicated to this partition. The check
boxes for any installed drives that cannot be used in the partition
are grayed out.
are grayed out.
Figure 44 The Chambers and Drives screen (F-QIP
shown).
shown).
Caution
Do not mix multiple generations of the same technology (for example, LTO-3 and
LTO-4) in the same partition. The media used by different generations may not be
compatible (for example, see
LTO-4) in the same partition. The media used by different generations may not be
compatible (for example, see