Инструкция для Canon imagePROGRAF iPF8400SE
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print
sheet or other printer status information.)
(When you have attempted to print a test print
sheet or other printer status information.)
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
"Replace roll with 10 in. wide or larger roll."
Cause
Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print sheet or other
printer status information.)
(When you have attempted to print a test print sheet or other
printer status information.)
Replace the roll with a roll 10 inches in width or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
2.
Replace the roll with a roll 10 inches wide or larger.
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
PaprWidth Mismatch
PaprWidth Mismatch
Cause
Corrective Action
When Detect Mismatch in the Control Panel menu is set
to Pause or Hold Job, the width of the loaded roll does
not match the width specified in Fit Roll Paper Width in
the printer driver.
to Pause or Hold Job, the width of the loaded roll does
not match the width specified in Fit Roll Paper Width in
the printer driver.
Press ▲ or ▼ to select Print, and then press the OK button to resume print-
ing.
However, note that this error may cause paper jams and affect the printing
quality.
ing.
However, note that this error may cause paper jams and affect the printing
quality.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Follow these steps to replace the roll to match the width specified in the
printer driver.
printer driver.
1.
Press ▲ or ▼ to select Change Paper, and then press the OK button.
2.
Replace with paper of the width configured in the printer driver.
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed when you select
Fit Roll Paper Width in the printer driver matches the width of the roll loa-
ded in the printer, and then try printing again.
Fit Roll Paper Width in the printer driver matches the width of the roll loa-
ded in the printer, and then try printing again.
Paper size not detected.
Paper size not detected.
Cause
Corrective Action
Paper has been loaded askew, or warped paper has been loaded.
Lift up the Release Lever and reload the pa-
per.
per.
If this error recurs after you reload the roll,
remove the Roll Holder from the printer, push
the roll firmly in until it touches the Roll Hold-
er flange, and reload the Roll Holder in the
printer.
remove the Roll Holder from the printer, push
the roll firmly in until it touches the Roll Hold-
er flange, and reload the Roll Holder in the
printer.
PaprWidth Mismatch
iPF8400SE
Error Message
Messages regarding paper
660