Инструкция для Canon imagePROGRAF iPF8400SE
Cause
Corrective Action
A print job for rolls was received when a sheet is
loaded.
loaded.
The printer now starts printing the print job.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
The roll is empty.
The roll is empty.
Cause
Corrective Action
The roll is empty.
Follow these steps to replace the used roll with a new roll of the same type and size.
1.
Lift the Release Lever and remove the roll.
2.
Load the new roll.
3.
If no barcode was printed on the roll, specify the type of paper.
4.
When you have selected ManageRemainRoll > On in the control panel menu and a barcode is
not printed on the roll, also specify the paper length.
not printed on the roll, also specify the paper length.
There is remaining roll paper, but
because it could not be advanced,
it could not be detected.
because it could not be advanced,
it could not be detected.
•
If the trailing edge of the paper
is taped to the roll paper core
is taped to the roll paper core
The paper was not advanced because the trailing edge is taped to the roll paper core.
Remove the used roll paper and insert a new roll paper.
Remove the used roll paper and insert a new roll paper.
There is remaining roll paper, but
because it could not be advanced,
it could not be detected.
because it could not be advanced,
it could not be detected.
•
If the unused portion of the roll
paper is heavy and is placing a
burden on the printer
paper is heavy and is placing a
burden on the printer
The paper was not advanced because the unused portion of the roll paper is heavy and is placing a
burden on the printer.
It may be helpful to change the printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
burden on the printer.
It may be helpful to change the printing mode, which will change the paper feed timing.
Choose a higher level of Print Quality in the Advanced Settings of the printer driver.
No sheets.
No sheets.
Cause
Corrective Action
A sheet has come out of the printer during printing.
1.
Lift the Release Lever and remove the paper.
2.
Reload the paper.
Sheet printing is selected.
Sheet printing is selected.
Cause
Corrective Action
You have attempted to print on a sheet, but
no sheet is loaded.
no sheet is loaded.
Press ▲ or ▼ to select Load Paper, and then press the OK button. Load a sheet, and
then print.
then print.
Press ▲ or ▼ and select Stop Printing or press the Stop button to stop printing.
The roll is empty.
iPF8400SE
Error Message
Messages regarding paper
662