Руководство Пользователя для Xerox Document Centre ColorSeries 50

Скачать
Страница из 284
DOCUMENT CENTRE CS 50 USER GUIDE
13–15
PROBLEM SOLVING
1
3
4
5
6
7
13
Problem
Suggested Solution
Paper jams when exiting 
the Paper Trays
Ensure that the edge guides of the paper tray fit snugly against the paper 
stack.
Do not fill the paper trays above the MAX fill line indicator. Tray 1 holds 
approximately 500 sheets of 20 lb. (75 gsm) paper. Trays 2, 3, and 4 hold 
approximately 550 sheets of 20 lb. (75 gsm) paper.
Close the tray slowly to avoid shifting the paper stack.
Output jams when exiting 
the copier/printer to the 
Output Catch Tray
Ensure the paper matches the type defined for the Paper Tray.
When no Sorter/Mailbox is present, the Output Catch Tray can hold up to 250 
sheets of 20 lb (75 gsm) paper. Empty the catch tray when output approaches 
this limit to ensure continuous production.
Ensure the first sheet is not blocking the paper exit, particularly for 11 x 17 
inch (A3) output.
Output jams when exiting 
the copier/printer to the 
Offset Catch Tray
Ensure the paper matches the type defined for the Paper Tray.
The Sorter/Mailbox Offset Catch Tray has a capacity of 500 sheets of 20 lb 
(75 gsm) paper. Remove the output when it approached this limit to ensure 
continuous production.
Ensure the first sheet is not blocking the paper exit, particularly for 11 x 17 
inch (A3) output.
11 x 17 inch (A3) output 
blocks exit
Ensure the first sheet of 11 x 17 inch (A3) output exits completely.
Copies originating from 
Paper Tray 5 are skewed. 
Jams may be occurring.
The paper guide on Paper Tray 5 may not be set correctly or may be too tight 
against the paper stack. Ensure that the paper guide snugly touches the 
paper stack.
Copier/printer does not 
make copies when Auto 
Paper is selected.
For the Auto Paper selection to function correctly, the size of the original doc-
ument must be the same size as the paper supply that is loaded in at least 
one of the trays. If not, select the paper tray size that best meets your needs. 
Or, if you wish to continue to use the Auto Paper feature, load one of the trays 
with the same size paper as the original document.
Loss of information or 
image deletions on cop-
ies made on paper that 
has been folded or 
creased.
If you must use folded or creased paper, use a lightweight copy paper, 20 lb 
(75 gsm). Also, avoid imaging the copy paper in the area of the fold or the 
crease.
Handle the copy paper carefully. Slight folds or creases may result in output 
deletions.
Fresh copies used as 
original documents cause 
jams in the Duplex Auto-
matic Document Feeder.
This problem is caused by the oil used in the fusing process. The problem can 
be reduced or eliminated by allowing output to sit for awhile so oil can evapo-
rate before using them as original documents.