Руководство По Обслуживанию для Cisco Cisco Unified MeetingPlace Audio Server
5-19
Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)
OL-
Chapter 5 Repairing and Maintaining the 8112 Server
Replacing the floppy drive
Figure 5-14 Floppy Drive Screws
Installing the new floppy drive
Step 1
Insert the floppy drive into the floppy housing.
Step 2
Fasten the floppy drive to the floppy housing with the captive screws. See
Step 3
Connect the non-keyed end of the floppy drive ribbon cable to the connector on the back of the floppy
drive. Be sure to align the cable correctly. See
drive. Be sure to align the cable correctly. See
Step 4
Connect the other end of the floppy drive ribbon cable (the keyed end) to the power connector on the
back of the drive.
back of the drive.
Installing the floppy housing
Step 1
Slide the floppy housing straight into the chassis and secure it with the four captive screws in the corners
of the housing. See
of the housing. See
Step 2
Attach the power cable to the back of the server.
Step 3
Power up the server. Refer to the