Cisco Cisco Unified MeetingPlace Audio Server Maintenance Manual

5-19

Cisco MeetingPlace Audio Server 5.2 Customer Engineering Guide (for Cisco MeetingPlace 8112)

OL-

Chapter 5 Repairing and Maintaining the 8112 Server

Replacing the floppy drive

Figure 5-14 Floppy Drive Screws

Installing the new floppy drive

Step 1

Insert the floppy drive into the floppy housing.

Step 2

Fasten the floppy drive to the floppy housing with the captive screws. See

Figure 5-14

Step 3

Connect the non-keyed end of the floppy drive ribbon cable to the connector on the back of the floppy
drive. Be sure to align the cable correctly. See

Figure 5-13

Step 4

Connect the other end of the floppy drive ribbon cable (the keyed end) to the power connector on the
back of the drive.

Installing the floppy housing

Step 1

Slide the floppy housing straight into the chassis and secure it with the four captive screws in the corners
of the housing. See

Figure 5-12

Step 2

Attach the power cable to the back of the server.

Step 3

Power up the server. Refer to the

“Powering up the server” section on page 4-17