Технические ссылки для Cisco Cisco 4100 Series Wireless LAN Controller

 

show 802.11b, config 802.11b disable, config 802.11b enable, config 802.11a 
channel

config 802.11b disable

Disable or enable 802.11b/g transmissions for the whole network or for an individual Cisco Radio using 
the config 802.11b disable command.
Note that you must use this command to disable the network before using other config 802.11b 
commands.
This command can be used any time the CLI interface is active.

>

config

Configure parameters.

802.11b

802.11b/g network parameters.

disable

Disable 802.11b/g.

enable/disable

Enable or disable.

network

Whole network.

<Cisco 1000 Series lightweight access point>Override the network setting for 

an individual <Cisco 1000 Series lightweight access 
point> Cisco Radio.

Enabled.

>config 802.11b disable network 
to disable the whole 802.11b/g network. 

>config 802.11b disable AP1 
to disable AP1 802.11b/g transmissions.

show sysinfo, show 802.11b, config 802.11a disable, config 802.11a enable, 
config 802.11b enable, config 802.11b beaconperiod

config 802.11b diversity

To configure the diversity option for 802.11b/g antennas, use the config 802.11b diversity command.

>

config

Configure parameters.

802.11b diversity

Diversity antennas for 802.11b/g.

<Cisco 1000 Series lightweight access point>Cisco 1000 Series lightweight 

access point name.

enable 

Between the two internal antennas.

sideA

Between the internal antennas and an external 
antenna connected to the Cisco 1000 Series light-
weight access point Left port.

sideB

Between the internal antennas and an external 
antenna connected to the Cisco 1000 Series light-
weight access point Right port.

Enabled.

To enable diversity for AP1: