Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
location expiry
To configure the timeout for RSSI values, use the location expiry command.
location expiry {calibrating-client| client| rogue-aps| tags}timeout-value
Syntax Description
Specifies the RSSI timeout value for calibrating clients.
calibrating-client
(Optional) Specifies the RSSI timeout value for clients.
client
Specifies the RSSI timeout value for rogue access points.
rogue-aps
Specifies the RSSI timeout value for RFID tags.
tags
The valid range for the timeout parameter for calibrating clients is 1 to 3600
seconds, and the default value is 5 seconds.
seconds, and the default value is 5 seconds.
The valid range for the timeout parameter for clients, rogue access points, and
RFID tags is 5 to 3600 seconds, and the default value is 5 seconds.
RFID tags is 5 to 3600 seconds, and the default value is 5 seconds.
timeout-value
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to set the RSSI timeout value for wireless clients:
Controller#
configure terminal
Controller(config)#
location expiry client 1000
Controller(config)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
50
OL-29471-01
location expiry