Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
location plm calibrating
To configure path loss measurement (CCX S60) request for calibrating clients, use the location plm calibrating
command.
command.
location plm calibrating {multiband| uniband}
Syntax Description
Specifies the path loss measurement request for calibrating clients on the
associated 802.11a or 802.11b/g radio.
associated 802.11a or 802.11b/g radio.
multiband
Specifies the path loss measurement request for calibrating clients on the
associated 802.11a/b/g radio.
associated 802.11a/b/g radio.
uniband
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Usage Guidelines
The uniband is useful for a single radio clients (even if the radio is a dual band and can operate in the 2.4-GHz
and the 5-GHz bands). The multiband is useful for multiple radio clients.
and the 5-GHz bands). The multiband is useful for multiple radio clients.
Examples
This example shows how to configure the path loss measurement request for calibrating clients on the associated
802.11a/b/g radio:
802.11a/b/g radio:
Controller#
configure terminal
Controller(config)#
location plm calibrating uniband
Controller(config)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
52
OL-29471-01
location plm calibrating