Технические ссылки для Cisco Cisco 5760 Wireless LAN Controller
location notify-threshold
To configure the NMSP notification threshold for RSSI measurements, use the location notify-threshold
command. To remove the NMSP notification threshold for RSSI measurements, use the no form of this
command.
command. To remove the NMSP notification threshold for RSSI measurements, use the no form of this
command.
location notify-threshold {client| rogue-aps| tags} db
no location notify-threshold {client| rogue-aps| tags}
Syntax Description
Specifies the NMSP notification threshold (in dB) for clients and rogue clients.
The valid range for the threshold parameter is 0 to 10 dB, and the default value is 0 dB.
client
Specifies the NMSP notification threshold (in dB) for rogue access points.
The valid range for the threshold parameter is 0 to 10 dB, and the default value is 0 dB.
rogue-aps
Specifies the NMSP notification threshold (in dB) for RFID tags.
The valid range for the threshold parameter is 0 to 10 dB, and the default value is 0 dB.
tags
The valid range for the threshold parameter is 0 to 10 dB, and the default value is 0 dB.
db
Command Default
None
Command Modes
Global configuration
Command History
Modification
Release
This command was introduced.
Cisco IOS XE 3.2SE
Examples
This example shows how to configure the NMSP notification threshold to 10 dB for clients. A notification
NMSP message is sent to MSE as soon as the client RSSI changes by 10 dB:
NMSP message is sent to MSE as soon as the client RSSI changes by 10 dB:
Controller#
configure terminal
Controller(config)#
location notify-threshold client 10
Controller(config)#
end
Consolidated Platform Command Reference, Cisco IOS XE Release 3SE (Cisco WLC 5700 Series)
OL-29471-01
51
location notify-threshold