Руководство По Установке для Cisco Cisco 4402 Wireless LAN Controller
8
5
Removing the VPN Termination
Module
Complete the following to remove the VPN termination module
from the rear panel of a wireless LAN controller:
from the rear panel of a wireless LAN controller:
Step 1
Remove all power from the wireless LAN controller
(Figure 5).
(Figure 5).
a.
Turn power off.
b.
Open the latch.
c.
Pull the power cord. If the controller has two power
modules, pull both power cords.
modules, pull both power cords.
Figure 5
Removing Power
Step 2
Use the screwdriver to loosen the captive screws that
secure the VPN termination module to the rear panel of
the controller.
secure the VPN termination module to the rear panel of
the controller.
Step 3
Pull the black lever to disconnect the VPN termination
module from the wireless LAN controller and slide the
module out of the controller (Figure 6).
module from the wireless LAN controller and slide the
module out of the controller (Figure 6).
146190
A
B