Руководство По Установке для Cisco Cisco TelePresence MX700
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
www.cisco.com
25
GettinG started Guide
Web interface
Provisioning set-up
(when using a provisioning system)
If in doubt for any of the parameters below, contact your
provisioning system provider.
See the Administrator guide for your product to find more
information about the provisioning settings.
Select provisioning infrastructure
1. Go to the
Configuration
tab and select
Advanced
Configuration
.
2. Open the
Provisioning
settings from the left column.
3. Select a provisioning infrastructure in the
Mode
drop
down list:
• TMS – Cisco TelePresence Management System
• VCS – Cisco Video Communication Server
• VCS – Cisco Video Communication Server
(only available for EX and MX series)
• Callway – Cisco TelePresence Callway
• CUCM – Cisco Unified Communications Manager
• CUCM – Cisco Unified Communications Manager
If you select
Off
, all configurations must be set manually
on the video system.
Set the required provisioning parameters
Which parameters to set depend on which infrastructure was selected.
TMS
1. It may be required to authenticate the video system with
Cisco TMS. If so, enter
LoginName
and
Password
in the
respective input fields.
Click
Click
ok
to save the settings.
2. Enter the IP address or DNS name of the Cisco
TMS server in the
Address
input field under the
ExtermalManager
heading.
1)
Click
ok
to save the setting.
3. Enter the
Path
to the provisioning service in the
corresponding input field
.
Click
ok
to save the setting.
VCS (for EX and MX Series only)
1. It may be required to authenticate the video system with
the Cisco VCS. If so, enter
LoginName
and
Password
in
the respective input fields.
Click
Click
ok
to save the settings.
2. Enter the IP address or DNS name of the Cisco VCS
in the
Address
input field under the
ExtermalManager
heading.
Click
Click
ok
to save the setting.
3. Enter the SIP
Domain
for the Cisco VCS in the
corresponding input field
.
Click
ok
to save the setting.
Have a look at the
appendix for more information about VCS
provisioning.
Callway
Upon ordering the Cisco TelePresence Callway service, you
have received a
Video number
and an
Activation code
.
Please send an e-mail to
support@callway.com
if you don't
have a video phone number and an activation code.
1. Enter the Video number in the
LoginName
input field
.
Click
ok
to save the setting.
2. Enter the Activation code in the
Password
input field
.
Click
ok
to save the setting.
CUCM
3. Enter the IP address or DNS name of the UCM
provisioning server in the
Address
input field under the
ExtermalManager
heading.
1)
You can find more details about setting up Cisco UCM
provisioning in the Administering TC endpoints on CUCM
guide.
1)
The DHCP server can be set up to provide the External Manager
address automatically (Option 242 for TMS; Option 150 for UCM).
Any input in the input field overrides the setting provided by DHCP.
Any input in the input field overrides the setting provided by DHCP.
Back to task overview
User interfaces
Introduction
Configuration
Table of contents
Appendices
Configuration