Руководство Администратора для Cisco Cisco Packet Data Gateway (PDG)

Скачать
Страница из 308
Gx Interface Support   
▀  Rel. 7 Gx Interface 
 
 
▄  Cisco ASR 5x00 Home Agent Administration Guide 
122 
   
Rel. 7 Gx Interface 
Rel. 7 Gx interface support is available on the Cisco ASR chassis running StarOS 8.1 or StarOS 9.0 and later releases 
for the following products: 
 
GGSN 
 
IPSG 
This section describes the following topics: 
 
  
 
  
 
  
 
  
 
  
Introduction 
For IMS deployment in GPRS/UMTS networks the system uses Rel. 7 Gx interface for policy-based admission control 
support and flow-based charging. The Rel. 7 Gx interface supports enforcing policy control features like gating, 
bandwidth limiting, and so on, and also supports flow-based charging. This is accomplished via dynamically 
provisioned Policy Control and Charging (PCC) rules. These PCC rules are used to identify Service Data Flows (SDF) 
and do charging. Other parameters associated with the rules are used to enforce policy control. 
The PCC architecture allows operators to perform service-based QoS policy, and flow-based charging control. In the 
PCC architecture, this is accomplished mainly by the Policy and Charging Enforcement Function (PCEF)/Cisco 
Systems GGSN and the Policy and Charging Rules Function (PCRF). 
In GPRS/UMTS networks, the client functionality lies with the GGSN, therefore in the IMS authorization scenario it is 
also called the Gateway. In the following figure, Gateway is the Cisco Systems GGSN, and the PCEF function is 
provided by Enhanced Charging Service (ECS). The Rel 7. Gx interface is implemented as a Diameter connection. The 
Gx messages mostly involve installing/modifying/removing dynamic rules and activating/deactivating predefined rules. 
The Rel. 7 Gx reference point is located between the Gateway and the PCRF. This reference point is used for 
provisioning and removal of PCC rules from the PCRF to the Gateway, and the transmission of traffic plane events from 
the Gateway to the PCRF. The Gx reference point can be used for charging control, policy control, or both by applying 
AVPs relevant to the application. The following figure shows the reference points between various elements involved in 
the policy and charging architecture.