Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
4
Release Notes for Cisco Aironet Client Utilities (Version 2.22) and Drivers (Version 2.22) for Windows CE
OL-2895-02
Upgrading to a New Client Utility and Driver Release
Loading a New Driver and Client Utilities
Follow the instructions below to install driver version 2.22 and client utility version 2.22 for your client
adapter.
adapter.
Step 1
Make sure that the client adapter is removed from the Windows CE device.
Step 2
Use a serial or USB cable to connect your Windows CE device to a laptop or PC running Microsoft
ActiveSync. A message appears on the Windows CE device indicating that it is connecting to the host.
After the Windows CE device is connected, the New Partnership window appears on the laptop or PC.
This window asks if you want to set up a partnership.
ActiveSync. A message appears on the Windows CE device indicating that it is connecting to the host.
After the Windows CE device is connected, the New Partnership window appears on the laptop or PC.
This window asks if you want to set up a partnership.
Note
Cisco recommends that you install the latest version of ActiveSync.
Step 3
Perform one of the following:
•
If you want to establish a partnership that allows you to synchronize files between the laptop or PC
and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
and the Windows CE device, select Yes, click Next, and follow the instructions on the screen to
specify the files to be synchronized and to finish setting up the partnership.
•
If you do not want to synchronize files and want to connect as a “guest,” select No and click Next.
The screen indicates that you are connected as a guest.
The screen indicates that you are connected as a guest.
Step 4
Use the laptop or PC’s web browser to access the following URL:
Step 5
Locate the section for client adapter drivers and utilities.
Step 6
Click the link for Windows CE 2.11 or 3.0, depending on which version of Windows CE your device is
running.
running.
Step 7
Select the WinCE211-PCMCIA-LMC-v222.exe or WinCE30-PCMCIA-LMC-v222.exe file.
Step 8
Read and accept the terms and conditions of the Software License Agreement.
Step 9
Select the WinCE211-PCMCIA-LMC-v222.exe or WinCE30-PCMCIA-LMC-v222.exe file to
download it.
download it.
Step 10
Save the file to a floppy disk or to the hard drive of your laptop or PC.
Step 11
Use Windows Explorer to locate the saved file.
Step 12
Double-click the *.exe file for your version of Windows CE (WinCE211-PCMCIA-LMC-v222.exe or
WinCE30-PCMCIA-LMC-v222.exe). The application creates an Install directory under the
ActiveSync directory, extracts the .cab files contained in the *.exe file, and copies them to the Install
directory.
WinCE30-PCMCIA-LMC-v222.exe). The application creates an Install directory under the
ActiveSync directory, extracts the .cab files contained in the *.exe file, and copies them to the Install
directory.
Step 13
Click Next to start the Windows CE Application Manager (CeAppMgr). CeAppMgr interrogates the
Windows CE device to determine its processor type.
Windows CE device to determine its processor type.
Note
If a Windows CE device is not connected to the laptop or PC (as instructed in
), click
Exit to quit the setup program and connect a Windows CE device or click Next to continue
the installation. If you select Next, a message appears indicating that the software will be
downloaded the next time a mobile device is connected. Click OK. The next time a Windows
CE device is connected to the laptop or PC through ActiveSync, CeAppMgr starts
automatically, and you are prompted to install the software. If you select Exit, click OK to
shut down CeAppMgr and start again beginning with
the installation. If you select Next, a message appears indicating that the software will be
downloaded the next time a mobile device is connected. Click OK. The next time a Windows
CE device is connected to the laptop or PC through ActiveSync, CeAppMgr starts
automatically, and you are prompted to install the software. If you select Exit, click OK to
shut down CeAppMgr and start again beginning with
.