Примечания к выпуску для Cisco Cisco Aironet 350 Wireless LAN Client Adapter
2
Release Notes for Cisco Aironet Mini PCI Client Adapter Firmware, Version 5.00.03
OL-2530-01
System Requirements
System Requirements
You will need the following in order to install and use firmware version 5.00.03:
•
A Cisco Aironet 350 series mini PCI card (MPI350)
•
A computer running Windows 95, 98, NT, 2000, Me, or XP
•
Windows Aironet Client Utility (ACU) version 5.02.005 or greater and Windows mini PCI card
driver version 3.4.9 or greater
driver version 3.4.9 or greater
Note
Mini PCI cards use different drivers and firmware than PC, LM, and PCI cards.
•
To benefit from the latest security features, access point firmware version 11.10T or greater
Network-EAP Authentication Requires Matching 802.1X Protocol Drafts
In order to use Network-EAP authentication on your wireless network, your client devices and
infrastructure devices (access points and bridges) must use the same 802.1X protocol draft. Mini PCI
card firmware release 5.00.03 supports draft 10 of the 802.1X protocol standard. Therefore, if client
devices use this version of firmware, an access point or bridge to which they associate must also be
configured to use draft 10. The table below lists firmware versions for Cisco Aironet products and the
drafts with which they comply.
infrastructure devices (access points and bridges) must use the same 802.1X protocol draft. Mini PCI
card firmware release 5.00.03 supports draft 10 of the 802.1X protocol standard. Therefore, if client
devices use this version of firmware, an access point or bridge to which they associate must also be
configured to use draft 10. The table below lists firmware versions for Cisco Aironet products and the
drafts with which they comply.
Firmware Version
Draft 8
Draft 10
1
1.
The functionality in draft 10 is equivalent to the functionality in draft 11, the
ratified draft of the 802.1X standard.
ratified draft of the 802.1X standard.
Mini PCI card (MPI350)
4.95.08 and later
—
x
Other client adapters (PCM34x/35x, LMC34x/35x, and
PCI34x/35x)
PCI34x/35x)
4.13
x
—
4.16
x
—
4.23
x
—
4.25 and later
—
x
Workgroup bridges (WGB34x/352)
8.58
x
—
8.61 and later
—
x
Access points (AP34x/35x)
11.05 and earlier
x
—
11.06 and later
2
2.
The default draft setting in access point and bridge firmware version 11.06
and later is draft 10.
and later is draft 10.
x
x
Bridges (BR352)
11.06 and later
x
x