Руководство По Установке для Cisco Cisco ONS 15454 M12 Multiservice Transport Platform (MSTP)
8
Installing the TXP_MR_10E_C and TXP_MR_10E_L Cards in the Cisco ONS 15454 SONET/SDH
78-17338-01
TXP_MR_10E_C Card Specifications
Port-Level Indicators
lists the four port-level LEDs on the TXP_MR_10E_C and TXP_MR_10E_L cards.
TXP_MR_10E_C Card Specifications
The TXP_MR_10E_C card has the following specifications:
•
Line (trunk side)
–
Bit rate: OC-192/STM-64 (9.95328 Gbps), OTU2 (10.70923 Gbps), 10GE (10.3125 Gbps),
10GE into OTU2 (non-standard 10.0957 Gbps), 10G FC (10.51875 Gbps), or 10G FC into
OTU2 (non-standard 11.31764 Gbps)
10GE into OTU2 (non-standard 10.0957 Gbps), 10G FC (10.51875 Gbps), or 10G FC into
OTU2 (non-standard 11.31764 Gbps)
–
Code: Scrambled NRZ
–
Fiber: 1550-nm single-mode
–
Maximum chromatic dispersion allowance: +/– 1200 ps/nm (specified penalty)
–
Loopback modes: Terminal and facility
Caution
You must use a 15-dB fiber attenuator (10 to 20 dB) when working with the TXP_MR_10E_C
card in a loopback on the trunk port. Do not use direct fiber loopbacks with the
TXP_MR_10E_C card. Using direct fiber loopbacks causes irreparable damage to the
TXP_MR_10E_C card.
card in a loopback on the trunk port. Do not use direct fiber loopbacks with the
TXP_MR_10E_C card. Using direct fiber loopbacks causes irreparable damage to the
TXP_MR_10E_C card.
–
Connectors: LC
–
Compliance: Telcordia GR-253-CORE, ITU-T G.707, ITU-T G.957, and ITU-T G.709
•
Transmitter (trunk side)
–
Maximum transmitter output power: +6 dBm
–
Minimum transmitter output power: +3 dBm
–
Transmitter: LN external modulator transmitter
–
Wavelength stability (drift): +/– 25 picometers (pm)
Note
An optical device on the card keeps the laser wavelength locked as closely as possible to the ITU nominal
value. The allowed drift is +/– 25 pm.
value. The allowed drift is +/– 25 pm.
•
Receiver (trunk side)
Table 4
TXP_MR_10E_C and TXP_MR_10E_L Port-Level Indicators
Port-Level LED
Description
Green Client LED
The green Client LED indicates that the client port is in service and that it is
receiving a recognized signal.
receiving a recognized signal.
Green DWDM LED
The green DWDM LED indicates that the DWDM port is in service and that
it is receiving a recognized signal.
it is receiving a recognized signal.