Инструкция С Настройками для Brother PE-DESIGN Ver.4,3,2

67

In Stage 4, outline data from Stage 3 are assigned line and region sewing attributes. This is done by 
using the Tool Box and the Sewing Attributes bar.
Clicking a button of the Tool Box changes the cursor mode and shape. The left side of the Status bar tells 
you what you can do in each cursor mode.  

In this mode, you can apply the current sewing attributes to an enclosed region. You can also change the 
sewing attributes applied to a region.

■

1

Click 

 on the Tool Box.

The shape of the cursor changes to 

 and is displayed together with a small rectangle.

The Sewing Attributes bar now looks like this: 

You can select the color and stitch at this step or after applying them to the region. See “Color” on 
page 75 and “Stitch” on page 76.
You can also use the menu (see “Sewing Attributes” on page 92) or the following method to define 
the density and other characteristics of the stitch. If you do not make these settings at this stage, 
the current settings will be applied, but you can modify them later.

Sets the cursor in region setting mode. 
When you start the application, this tool is active by default

Cursor shape: 

, with a miniature of the button

Sets the cursor in line (all) setting mode.

Cursor shape: 

, with a small image of the button

Sets the cursor in line (part) setting mode.

Cursor shape: 

, with a small image of the button

Sets the cursor in hole sewing mode.

Cursor shape: 

, with a small image of the button

Sets the cursor in zoom-in mode.

Cursor shape: 

Maximizes the selected Design Page to fit in the window.

Sets the cursor in zoom-out mode.

Cursor shape: