Справочник Пользователя для Samsung VRF530E Robot VC, Visionary Mapping™ -järjestelmä, 0.6 ℓ

English

36

Appendic

es

Troubleshooting

Symptom

Checklist

The robot vacuum 
cleaner is not working 
at all.

•  Check if the power switch is on.
•  Check if all the icons are displayed on display panel.
•  Check if the battery of the robot vacuum cleaner is 

depleted.

 

– When “Lo” is displayed, carry the robot vacuum cleaner 

to the charger to charge it.

•  Replace the batteries (AAA type) when the remote 

controller is not working.

•  Check if the dustbin is assembled.

The robot vacuum 
cleaner is stopped during 
cleaning process.

•  When “Lo” is displayed on the display panel, carry the 

robot vacuum cleaner to the charger to charge it.

•  When the robot vacuum cleaner is stuck by the obstacles 

such as cord, threshold etc, pick it up to remove it from the 
obstacle.

 

– If any fabric or string is caught in the drive wheel, turn 

off the power switch and remove the fabric or string 
before using it again.

•  When the robot vacuum cleaner stuck to the floor where 

there is a height difference, carry it to another area.

Suction power is weak.

•  If the filter is clogged, turn off the power switch and clean 

the dustbin and filter.

•  When there’s too much dust in the dustbin, suction power 

may get weakened. Turn off the power switch and empty 
the dustbin.

•  If the intake (on bottom of The robot vacuum cleaner) is 

blocked by foreign matters, turn off the power switch and 
remove foreign matter from the intake.

•  When noise suddenly increase, turn off the emergency 

switch and empty the dustbin.

SR5000_5ge_00734F-02_EE.indb   36

2016-05-31   오후 12:04:01