Справочник Пользователя для Acer altos r510 mk2
4 Configuring the system
40
Installing the Air Baffle
1
Lower the baffle into the chassis between the power supply and
the drive bay area, to the left of the fan module.
the drive bay area, to the left of the fan module.
2
While setting the baffle into place, route the cables beneath it
appropriately.
appropriately.
3
Fit the tab that extends from the front of the baffle under the
drive bay area.
drive bay area.
4
Line up the guide pins on the baffle with the matching holes in the
chassis floor and in the backplane if you have a backplane
installed. See letter “A” in the figure below.
chassis floor and in the backplane if you have a backplane
installed. See letter “A” in the figure below.
5
Push down firmly on the air baffle to secure it to the chassis.