Справочник Пользователя для Acer altos r510 mk2
4 Configuring the system
42
6
Remove the four screws that attach the plastic retention device or
the previously installed hard drive to the drive carrier. Two screws
are at each side of the retention device or the hard drive. Store the
plastic retention device for future use.
the previously installed hard drive to the drive carrier. Two screws
are at each side of the retention device or the hard drive. Store the
plastic retention device for future use.
7
With the drive circuit-side down, position the connector end of the
drive so that it is facing the back of the carrier.
drive so that it is facing the back of the carrier.
8
Attach the hard drive to the carrier using the four screws removed
from the carrier.
from the carrier.