Справочник Пользователя для Alcatel-Lucent speedtouch 500
313
PPPoE Commands
silent
Do not send anything at startup and just listen for incoming LCP messages
(on) or retry up to 10 times to establish the connection (off).
By default, the silent state is disabled.
(on) or retry up to 10 times to establish the connection (off).
By default, the silent state is disabled.
OPTIONAL
echo
Send LCP echo requests at regular intervals (on) or not (off).
By default the sending of LCP echo requests is enabled.
By default the sending of LCP echo requests is enabled.
OPTIONAL
mru
A number between 293 and 8192.
Represents the maximum packet size the SpeedTouch™ should negotiate
to be able to receive (default=1492).
Represents the maximum packet size the SpeedTouch™ should negotiate
to be able to receive (default=1492).
OPTIONAL
laddr
The local IP address of the peer-to-peer connection.
Specifying a local IP address forces the remote side of the PPPoE link (if it
allows to) to accept this IP address as the SpeedTouch™ PPPoE session IP
address.
If not specified, the SpeedTouch™ will accept any IP address.
Typically the local IP address parameter is not specified.
Specifying a local IP address forces the remote side of the PPPoE link (if it
allows to) to accept this IP address as the SpeedTouch™ PPPoE session IP
address.
If not specified, the SpeedTouch™ will accept any IP address.
Typically the local IP address parameter is not specified.
OPTIONAL
raddr
The remote IP address of the peer-to-peer connection.
Specifying a remote IP address forces the remote side of the PPPoE link (if
it allows to) to accept this IP address as its PPPoE session IP address.
If not specified, the SpeedTouch™ will accept any IP address.
Typically the remote IP address parameter is not specified.
Specifying a remote IP address forces the remote side of the PPPoE link (if
it allows to) to accept this IP address as its PPPoE session IP address.
If not specified, the SpeedTouch™ will accept any IP address.
Typically the remote IP address parameter is not specified.
OPTIONAL
netmask
The subnetmask associated with this address.
Specifying a subnetmask forces the remote side (if it allows to) to accept
this subnetmask as the PPPoE session subnetmask.
If not specified, the SpeedTouch™ will accept any subnetmask.
The SpeedTouch™ will only request/accept a subnetmask if a DHCP
server pool is associated, i.e. if the [pool] parameter is specified.
Specifying a subnetmask forces the remote side (if it allows to) to accept
this subnetmask as the PPPoE session subnetmask.
If not specified, the SpeedTouch™ will accept any subnetmask.
The SpeedTouch™ will only request/accept a subnetmask if a DHCP
server pool is associated, i.e. if the [pool] parameter is specified.
OPTIONAL
format
The negotiated subnetmask specified in the netmask parameter is speci-
fied in the dotted format (dotted) or in Classles Inter Domain
Routing (CIDR) format (cidr).
By default, the format is CIDR.
fied in the dotted format (dotted) or in Classles Inter Domain
Routing (CIDR) format (cidr).
By default, the format is CIDR.
OPTIONAL
pool
The name of the free DHCP server pool to which the acquired IP subnet
must be assigned to.
must be assigned to.
OPTIONAL
savepwd
Save password (on), if supplied, or do not save the password (off).
By default, the saving of the password is disabled.
By default, the saving of the password is disabled.
OPTIONAL
demanddial
Enable (on) or disable (off) the dial-on-demand feature.
OPTIONAL
primdns
The IP address of the primary DNS server.
In case a primary DNS server is specified the SpeedTouch™ will negotiate
this IP address with the remote side.
If not specified, the SpeedTouch™ will accept any IP address.
In case a primary DNS server is specified the SpeedTouch™ will negotiate
this IP address with the remote side.
If not specified, the SpeedTouch™ will accept any IP address.
OPTIONAL
secdns
The IP address of the (optional) secondary DNS server.
In case a secondary DNS server is specified the SpeedTouch™ will nego-
tiate this IP address with the remote side.
If not specified, the SpeedTouch™ will accept any IP address.
In case a secondary DNS server is specified the SpeedTouch™ will nego-
tiate this IP address with the remote side.
If not specified, the SpeedTouch™ will accept any IP address.
OPTIONAL
dnsmetric
A number between 1 and 100.
Represents the DNS route metric to be used for the negotiated DNS
servers (default=1).
Represents the DNS route metric to be used for the negotiated DNS
servers (default=1).
OPTIONAL