Справочник Пользователя для Alcatel-Lucent speedtouch 500
65
Bridge Commands
bridge ifdetach
Detach (i.e. disconnect) a bridge interface.
SYNTAX:
EXAMPLE:
Note
In case of a SpeedTouch™530 device, never change, or delete the usb_bridge interface!
RELATED COMMANDS:
bridge ifdetach
intf = <intfname>
intf
The name of the bridge interface to detach.
Browse through the available entries via the ARROW UP and
ARROW DOWN keys.
Browse through the available entries via the ARROW UP and
ARROW DOWN keys.
REQUIRED
=>bridge iflist intf=TestBridge
TestBridge :
TestBridge :
dest : Br1
Retry: 10
Retry: 10
QoS: default
Encaps: llc/snap
Fcs: off
Connection State: connected
Port: wan0
PortState: forwarding
RX bytes: 75
frames: 12
TX bytes: 30246
frames: 91
dropframes:
0
=>bridge ifdetach intf=TestBridge
=>bridge iflist intf=TestBridge
TestBridge :
=>bridge iflist intf=TestBridge
TestBridge :
dest : Br1
Retry: 10
Retry: 10
QoS: default
Encaps: llc/snap
Fcs: off
Connection State: not-connected
Port:
(unassigned)
PortState: forwarding
=>
Create a bridged Ethernet interface.
Attach a bridge interface.
Configure a bridge interface.
Delete a bridge interface.
Show current bridge configuration.