Справочник Пользователя для Canon pixma ip4300

Страница из 102
13
Before Printing
z
Loading Paper in the Auto Sheet Feeder
1
Flatten the four corners of the paper before loading it.
2
Prepare to load paper.
(1) Open the Paper Support and pull out the Paper 
Support Extension to support the paper.
(2) Press the Open Button to open the Paper 
Output Tray. 
(3) Pull out the Paper Output Tray Extension 
completely.
(4) Press the Paper Feed Switch so that the Auto 
Sheet Feeder lamp (A) lights.
Note
z
Align the edges of paper neatly before loading. Loading paper without aligning the edges may 
cause paper jams.
z
If paper is curled, hold the opposing curled corners and gently bend them in the opposite 
direction until the paper becomes completely flat. See “Paper is curled.” on page 68.
z
To avoid curling, handle paper as follows.
– Put unused paper back into the package and keep them on a level surface.
– Take out only the necessary number of sheets from the package, just before printing.
Note
When closing the Paper Output Tray Extension after 
printing, lift it up slightly.
Note
You can also select the paper source with the printer 
driver.
For details, refer to the Printer Driver Guide on-screen 
manual.
(1)
(2)
(3)
(4)
(A)
downloadlike
ArtboardArtboardArtboard