Справочник Пользователя для Samsung iDCS 100

34

This program is used to swap information associated with two stations. All
assignments such as trunk ring, station group, station COS, station speed
dial etc. will follow this program. 12 button keysets and 24 button keysets
can be exchanged. Basic 7 button keysets can be exchanged with Basic 7
button key sets. Single line stations numbers can be exchanged. If incom-
patible set types are selected the system will provide an ERROR: NO MATCH
message. 12 button and 24 button key assignments should be taken in con-
sideration when relocating these type of sets. The table below shows which
phones can be switched with each other.

NOTE: In order to use this program it must first be activated by a technician.
Please see your installing company to have this done if you wish to use this
program.

UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
SPK - Used to store data and advance to next program.
HOLD - Used to clear previous entry.
ANS/RLS - Used to select ALL.

1. Press TRSF 315

Display shows

2. Enter first station number (e.g., 202)

Press RIGHT soft key to move cursor

3. Enter second station number (e.g., 210) 

Press RIGHT soft key to enter data

4. Display will return to STEP 1

Go to STEP 2

OR press TRSF to store and exit 
programming.

This program provides the ability to set as many as 20 different holidays.
Each holiday will override the System Operating Mode for that particular
date with a programmed ring plan.

UP & DOWN - Used to scroll through options.
KEYPAD - Used to enter selections.
SOFT KEYS - Move cursor left and right.
HOLD - Used to clear an entry.

1. Press TRSF and then dial 512

Display shows

2. Press the right soft key to move the

cursor to bottom half of display

3. Enter the desired ring plan (e.g., 0-6)

Display will return to STEP 1

4. Press UP or DOWN to change display

to holiday assignment

5. Press the right soft key to move the

cursor to bottom half of display

6. Enter a desired holiday date 

(e.g., 1225)

7. Press TRSF to store and exit 

programming OR press SPK to store

and advance to the next program

33