Справочник Пользователя для Chamberlain security hd200dm
32
CARE OF YOUR OPENER
LIMIT AND FORCE ADJUSTMENTS:
Weather conditions may cause
some minor changes in door
operation requiring some
re-adjustments, particularly during
the first year of operation.
some minor changes in door
operation requiring some
re-adjustments, particularly during
the first year of operation.
Pages 27 and 28 refer to the limit
and force adjustments. Only a
screwdriver is required. Follow the
instructions carefully.
and force adjustments. Only a
screwdriver is required. Follow the
instructions carefully.
Repeat the safety reverse test
(Adjustment Step 3, page 29)
after any adjustment of limits or force.
(Adjustment Step 3, page 29)
after any adjustment of limits or force.
FORCE CONTROLS
1
3
9
7
5
1
3
9
7
5
LIMIT CONTROLS
KG
KG
MAINTENANCE SCHEDULE
Once a Month
•
Manually operate door. If it is unbalanced or binding, call
a trained door systems technician.
a trained door systems technician.
•
Check to be sure door opens & closes fully. Adjust limits
and/or force if necessary. (See pages 27 and 28)
and/or force if necessary. (See pages 27 and 28)
•
Repeat the safety reverse test. Make any necessary
adjustments. (See Adjustment Step 3)
adjustments. (See Adjustment Step 3)
Twice a Year
•
Check chain tension. Disconnect trolley first. Adjust if
necessary. (See page 11)
necessary. (See page 11)
Once a Year
•
Oil door rollers, bearings and hinges. The opener does
not require additional lubrication. Do not grease the door
tracks.
not require additional lubrication. Do not grease the door
tracks.
NOTICE: To comply with FCC and or Industry Canada (IC) rules, adjustment or modifications of this
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
receiver and/or transmitter are prohibited, except for changing the code setting or replacing the
battery. THERE ARE NO OTHER USER SERVICEABLE PARTS.
Tested to Comply with FCC Standards FOR HOME OR OFFICE USE. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
THE REMOTE CONTROL BATTERY
To prevent possible SERIOUS INJURY or DEATH:
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
To reduce risk of fire, explosion or chemical burn:
• Replace ONLY with 3V2032 coin batteries.
• Do NOT recharge, disassemble, heat above 100°C (212°F) or
• NEVER allow small children near batteries.
• If battery is swallowed, immediately notify doctor.
To reduce risk of fire, explosion or chemical burn:
• Replace ONLY with 3V2032 coin batteries.
• Do NOT recharge, disassemble, heat above 100°C (212°F) or
incinerate.
The lithium battery should
produce power for up to
5 years.
produce power for up to
5 years.
To replace battery, use the
visor clip or screwdriver blade
to pry open the case as
shown. Insert battery positive
side up (+).
Dispose of old battery
properly. Replace the battery
with only 3V2032 coin cell batteries.
visor clip or screwdriver blade
to pry open the case as
shown. Insert battery positive
side up (+).
Dispose of old battery
properly. Replace the battery
with only 3V2032 coin cell batteries.
Battery
positive
side up (+)
positive
side up (+)