Справочник Пользователя для National Instruments 1142
Chapter 1
About the SCXI-1141/1142/1143
1-4
ni.com
•
The following help file for software information:
–
Start»Programs»National Instruments»NI-DAQ»
NI-DAQmx Help
NI-DAQmx Help
Installing Application Software, NI-DAQmx, and the
DAQ Device
DAQ Device
Refer to the DAQ Getting Started Guide packaged with the NI-DAQmx
software to install your application software, NI-DAQmx driver software,
and the E/M Series DAQ device to which you will connect the
SCXI-1141/1142/1143. NI-DAQ 8.3 or later is recommended to configure
and program the SCXI-1141/1142/1143 module.
software to install your application software, NI-DAQmx driver software,
and the E/M Series DAQ device to which you will connect the
SCXI-1141/1142/1143. NI-DAQ 8.3 or later is recommended to configure
and program the SCXI-1141/1142/1143 module.
Note
Refer to the Read Me First: Radio-Frequency Interference document before
removing equipment covers or connecting or disconnecting any signal wires.
Installing the SCXI-1141/1142/1143 into an SCXI Chassis or a PXI/SCXI
Combination Chassis
Combination Chassis
Refer to the SCXI Quick Start Guide to install the SCXI-1141/1142/1143
module.
module.
Installing the Terminal Block
Table 1-1 shows the supported SCXI-1141/1142/1143 terminal blocks.
Refer to the SCXI Quick Start Guide and the terminal block installation
guide for more information about the terminal block.
Refer to the SCXI Quick Start Guide and the terminal block installation
guide for more information about the terminal block.
Table 1-1. Accessories Available for the SCXI-1141/1142/1143
Accessory
Description
SCXI-1304
Screw terminal block—Mounts on the front of the SCXI-1141/1142/1143 module.
It includes AC coupling circuitry and ground referencing through a 100 K
It includes AC coupling circuitry and ground referencing through a 100 K
Ω bias
resistor on each channel.
SCXI-1305
BNC terminal block—Mounts on the front of the SCXI-1141/1142/1143 module.
It is functionally equivalent to the SCXI-1304 terminal block.
It is functionally equivalent to the SCXI-1304 terminal block.