Справочник Пользователя для Zebra 49834

352

170PAX4 Maintenance Manual

57518L-001 Rev. 1

3/18/05

Applicator Interface Connector

11

END PRINT

Output

See 

 for more 

information about the start and end print signals.

• MODE 0—The applicator port is OFF.

• MODE 1—Asserted LOW only while the print 

engine is moving the label forward; otherwise 
deasserted HIGH.

• MODE 2—Asserted HIGH only while the print 

engine is moving the label forward; otherwise 
deasserted LOW.

• MODE 3—Default) Asserted LOW for 20 

milliseconds when a label has been completed and 
positioned. Not asserted during continuous printing.

• MODE 4—Asserted HIGH for 20 milliseconds when 

a label has been completed and positioned. Not 
asserted during continuous printing.

12

MEDIA OUT

Output

Asserted LOW while there is no media in the print 
engine.

13

RIBBON OUT

Output

Asserted LOW while there is no ribbon in the print 
engine.

14

DATA READY

Output

See 

 for more 

information about this signal.

• Asserted LOW when sufficient data has been received 

to begin printing the next label.

• Deasserted HIGH whenever printing stops after the 

current label, due to either a pause condition or the 
absence of a label format.

15

SPARE 

Output

To be determined. 

* Applicator boards have separate part numbers for the +5V version (57056M) and the +24-28V version (57389M).