Справочник Пользователя для iceberg 20100

Standing Top on it's front (slotted
edge down), position the 2 center
panels on edge. Line up the 2
pre-drilled holes on the top of each
panel and insert them onto the
center Cam-Lock pins. Insert locking
nut into pre-drilled hole and rotate
1/2 turn or until tight. Repeat for
each Cam-Lock pin.

Step 7.
Position the 2 side panels on
edge and line up pre-drilled holes
with remaining Cam-Lock pins.
Insert pins into holes. Insert
locking nut into pre-drilled hole
and rotate 1/2 turn or until tight.
Repeat for each Cam-Lock pin.

Step 8.
Insert back into mortised grooves
on sides and slide in until it fits into
mortised groove on top.

Step 9.
Line up pre-drilled holes on bottom
of sides and divider panels with 8
Cam-Lock pins on bottom. Insert
pins into holes. IMPORTANT After
Step 9, rotate BeverageMate onto
one side.

Step 10.
Insert Cam-Lock locking nuts into
pre-drilled holes and rotate 1/2 turn
or until tight. IMPORTANT After
Step 10, rotate BeverageMate up
on casters.