Справочник Пользователя для HydroPoint data systems inc. WT008
2.
Turn the Lower Line dial to select a number from “0” to “9.”
3.
Continue to turn the Upper Line and Lower Line dials until you
have selected the correct five-digit zip code.
have selected the correct five-digit zip code.
Setting the ET Zone
The ET Zone number is provided at activation. Along with the
Microzone value it is used by the controller to receive its local ET
updates. In most locations, you will not be required to set this at
activation.
Microzone value it is used by the controller to receive its local ET
updates. In most locations, you will not be required to set this at
activation.
To set the ET zone number:
1.
Under “Setup”, turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to select a number from “0” to “9.”
3.
Continue to turn the Upper Line and Lower Line dials until you
have selected the correct five-digit zone number.
have selected the correct five-digit zone number.
Displaying the Group Number
The group number is assigned at activation or at a later date via
HydroPoint Customer Service. If not assigned, the default is 00000.
This number is used to group controllers together for sending Data
Service messages.
HydroPoint Customer Service. If not assigned, the default is 00000.
This number is used to group controllers together for sending Data
Service messages.
To set the group number:
1.
Under “Setup,” turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to select a number from “0” to “9.”
GROUP NUMBER
00835
SET ET ZONE# Digit 1
12345
–
Using Special Features
79
The lower line indicates that no irrigation will occur until the
Function Selector dial is turned to another position.
Function Selector dial is turned to another position.
Once the Function Selector dial is turned to “OFF” and it remains in
the OFF position for at least one (1) second, all active controller
functions are stopped until you return the Function Selector dial to
the “RUN” position (or any other Function position). This prevents
momentary interruption of any irrigation when rotating the Function
Selector dial through the “OFF” position.
the OFF position for at least one (1) second, all active controller
functions are stopped until you return the Function Selector dial to
the “RUN” position (or any other Function position). This prevents
momentary interruption of any irrigation when rotating the Function
Selector dial through the “OFF” position.
Activating the Rain Service
WeatherTRAK ET plus Rain Service monitors the rainfall in your area
with a sophisticated array of rain sensors and other weather devices.
The rainfall amount is then sent to your controller with the daily ET
Everywhere Service broadcast. The rainfall is then used to calculate a
new soil depletion value to take advantage of the rainfall in its
calculating of the next day’s irrigation schedule.
with a sophisticated array of rain sensors and other weather devices.
The rainfall amount is then sent to your controller with the daily ET
Everywhere Service broadcast. The rainfall is then used to calculate a
new soil depletion value to take advantage of the rainfall in its
calculating of the next day’s irrigation schedule.
The Rain Service is available in some markets. This service can only
be activated by calling HydroPoint Customer Service.
be activated by calling HydroPoint Customer Service.
1.
Under “Setup”, turn the Upper Line dial until you see:
2.
Turn the Lower Line dial to select “Yes” or “No.”
Note:
This is only changeable after activation by HydroPoint.
Setting the Zip Code
To set your zip code:
1.
Under “Setup”, turn the Upper Line dial until you see:
SET ZIP CODE Digit1
15645
–
RAIN SERVICE ACTIVE
No
Using Special Features
78