Справочник Пользователя для HydroPoint data systems inc. WT008
3.
Continue to turn the Upper Line and Lower Line dials until you
have selected the correct five-digit group number.
have selected the correct five-digit group number.
You can now return the Function Selector to “Run” or another
programming function. If you return the Function Selector to
“Run,” the display will show the current time and date.
programming function. If you return the Function Selector to
“Run,” the display will show the current time and date.
Setting the Maximum Backup ET
This value is used by the controller as a backup in the event that a
communication failure occurs with the WeatherTRAK ET plus and
daily ET values are not received.
communication failure occurs with the WeatherTRAK ET plus and
daily ET values are not received.
To set the Maximum Backup ET:
1.
Under “Setup,” turn the Upper Line dial until you see:
The lower line shows the default setting: “2.00.”
2.
Turn the Lower Line dial to select a number from “0” to “9.”
3.
Continue to turn the Upper Line and Lower Line dials until you
have selected the correct three-digit number.
have selected the correct three-digit number.
Note:
The maximum Backup ET value includes a seasonal curve
associated with the set number such that it that will
automatically adjust the backup ET value according to the time
of the year.
automatically adjust the backup ET value according to the time
of the year.
MAX BACKUP ET Digit 1
2:00
–
Using Special Features
80