Справочник Пользователя для Adtran TRC6420
Section 3 Engineering Guidelines
TRACER 6420 System Manual
28
Copyright © 2005 ADTRAN, Inc.
612806420L1-1A
CRAFT Port (DB-9)
The
CRAFT
connector provides a female DB-9 terminal connection (wired as a DCE interface), which is
used for terminal access to the TRACER system. Table 4 shows the pinout. A null modem cable is
necessary for connecting the
necessary for connecting the
CRAFT
port to a modem for remote dial-up access. Table 5 shows the pinout
for a null modem cable.
4.
REVIEWING THE TRACER 6420 REAR PANEL DESIGN
Figure 2 on page 29 identifies the features of the TRACER rear panel, and Table 6 on page 29 provides a
brief description of each interface.
brief description of each interface.
Table 4. CRAFT Pinout
Pin
Name
Source
Description
1
CD
TRACER
Carrier detect
2
RXDATA
TRACER
Received data (to attached equipment)
3
TXDATA
Attached Equipment
Transmit data (from attached equipment)
4
DTR
Attached Equipment
Data terminal ready (unused)
5
GND
Common
Signal ground
6
DSR
TRACER
Data set ready
7
RTS
Attached Equipment
Request to send (unused)
8
CTS
TRACER
Clear to send
9
RI
TRACER
Ring indicator (unused)
Table 5. Null-Modem Pinout
Modem
Pin
TRACER 6420
Pin
1 (CD)
unconnected
2 (RXD)
3 (TXD)
3 (TXD)
2 (RXD)
4 (DTR)
6 (DSR)
5 (GND)
5 (GND)
6 (DSR)
4 (DTR)
7 (RTS)
8 (CTS)
8 (CTS)
7 (RTS)
9 (RI)
unconnected