Справочник Пользователя для Zebra Technologies Corporation RFID-Z4M-01

46

 

R4Mplus User Guide

Basic Configuration

If your labels are not printing correctly, the configuration may need to be changed because the 
printer defaults may not reflect the options that you need. Media, ribbon, darkness, print mode, 
media type, sensor type, and print method all affect the way the printer is configured. This 
section covers how to change these basic configuration options for your printer through the 
printer’s front panel. Review 

to familiarize yourself with the front panel 

controls. 

 for more detailed 

information on all of the configuration options available on your printer.

Many printer settings may also be controlled by your printer’s driver or label preparation 
software. See the driver or software documentation for more information.

1. Enter the configuration mode by pressing SETUP/EXIT.

DARKNESS

 displays.

2. Is the printed image too dark or too light? Or does the ribbon stick to the media?

• If no, press PLUS (+) to move to the next option: 

PRINT SPEED

. Continue with 

.

• If yes, complete the following steps:

2.1. Press SELECT.
2.2. If the labels moved forward, but the print is light or there is no print, press PLUS 

(+) to increase the darkness. If the print is too dark, or the ribbon sticks to the 
media, press MINUS (–) to decrease the darkness.

2.3. Press SELECT to accept the change.
2.4. Press PLUS (+) to move to the next option.

PRINT SPEED

 displays. Continue with 

.

3. Is the printed image crisp?

• If yes, press PLUS (+) to move to the next option: 

TEAR-OFF

. Continue with 

.

• If the print is dark enough but the image is not crisp, slow down the print speed by 

completing the following steps. Print speed is given in inches per second (ips).

3.1. Press SELECT.
3.2. Press PLUS (+) to increase the speed or MINUS (–) to decrease the speed.
3.3. Press SELECT to accept the changes.
3.4. Press PLUS (+) to move to the next option.

TEAR OFF displays. Continue with 

.