Справочник Пользователя для Zebra Technologies Corporation RFID-Z4M-01

48

 

R4Mplus User Guide

Basic Configuration

For examples of non-continuous and continuous media, see 

 on page 15

.

7. Does the media type on the display match the type of media that you are using?

• If yes, press PLUS (+) to move to the next option: 

PRINT METHOD

. Continue with 

.

• If your label media does not match the Media Type, complete the following steps:

7.1. Press SELECT.
7.2. Press PLUS (+) or MINUS (–) to scroll through the setting options. Stop at the 

setting that matches your printer options (Continuous or Noncontinuous).

7.3. Press SELECT to accept the change.
7.4. Press PLUS (+) to move to the next option.

PRINT METHOD

 displays. Continue with 

.

The two choices for print method are: thermal and direct. You can find out if a label is thermal 
or direct thermal by scratching it with your fingernail. If your nail leaves a black mark, the 
media is direct thermal. If it does not leave a mark, the media is thermal.

• Use Thermal Transfer if you are using ribbon with your label material. 
• Use Direct Thermal if you are not using ribbon. Direct thermal label media has ink 

embedded in the label material that is brought out by the heat of the printhead.

8. Does the Print Method setting match your media type?

• If yes, continue with 

.

• If no, complete the following steps:

8.1. Press SELECT.
8.2. Press PLUS (+) or MINUS (–) to scroll through the setting options. Stop at the 

setting that matches your printer options (Thermal Transfer or Direct Thermal).

8.3. Press SELECT to accept the change.

9. Press SETUP/EXIT to leave the front panel menu.

SAVE CHANGES PERMANENT

 displays. For other save options, see 

Mode on page 44

.

10. Press SETUP/EXIT again.

SAVING PERMANENT

 displays. One or more labels may feed out, depending on your 

settings. The LCD displays 

PRINTER READY

.