Справочник Пользователя для Movea Inc MPOD3
14
.
Be sure to maintain the MPOD in the same position, in a sphere of 5cm of diameter.
Carry out slow movements without acceleration, nor shock
X.
CLEANING
1.
CLEANING THE MOTIONCONTROLLER™
The CTRLER/CHARGER are made of ABS plastic. Frequent disinfection or cleaning is not needed
because they’re not in contact with the body.
Disconnect the CTRLER/CHARGER before cleaning. Use a soft and dry cloth.
because they’re not in contact with the body.
Disconnect the CTRLER/CHARGER before cleaning. Use a soft and dry cloth.
2.
CLEANING THE MOTIONPOD™
MPOD and the mechanical interface are made of natural polycarbonate (for the transparent cover)
and of “polycarbonate” (the Black bottom cover, and mechanical interface). The button on MPOD is
in NBR. Use products listed below or other products compatible with these materials. Cleaning
products must be compatible with Polycarbonate. Do not immerse the MPOD in these products.
and of “polycarbonate” (the Black bottom cover, and mechanical interface). The button on MPOD is
in NBR. Use products listed below or other products compatible with these materials. Cleaning
products must be compatible with Polycarbonate. Do not immerse the MPOD in these products.
•
Use protection gloves (medical or latex)
•
Use a wet cloth humidified with the below products example of well adapted cleaning
products: HEXANIOS G+R from Anios laboratories
products: HEXANIOS G+R from Anios laboratories
(
http://www.anios.com
)