Справочник Пользователя для Selex Sistemi Integrati Inc. VOR2
Model 1150A DVOR
Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3-67
for the indicators and on the Battery Charging Power Supply (BCPS) Assembly.
Figure 3-64 BCPS Assembly Controls and Indicators
Table 3-8 Equipment Controls & Indicators
AC ON
This LED indicates that the AC voltage is present at the input to the
VOR.
VOR.
DC ON
This indicates that the DC output of the BCPS.
AC FAIL
This LED indicates that the AC voltage is not present at the input to the
VOR.
VOR.
BATTERY FAULT
This LED indicates that the battery voltage is very low and can be
caused by a faulty or disconnected battery.
caused by a faulty or disconnected battery.
ON BATTERY
This LED indicates that the VOR is operating on batteries.
FAST CHARGE
This LED indicates that the charge current is above 2 amps.
TRICKLE CHARGE
This LED indicates that the charge current is low (trickle).
CHARGER RESET
This momentary switch is used to start operation on batteries with AC
power present.
power present.
CPU OK
This LED when lit (GREEN) indicates that the BCPS processor is
operating normally.
operating normally.