Справочник Пользователя для Selex Sistemi Integrati Inc. VOR2
Model 1150A DVOR
Rev. - November, 2008
This document contains proprietary information and such information may not be disclosed
to others for any purposes without written permission from SELEX Sistemi Integrati Inc.
3-69
and
for the indicators and controls on the Monitor CCA.
Figure 3-66 Monitor CCA
Table 3-10 Monitor CCA (1A3A3, 1A3A10) Controls and Indicators
Integral Primary
Alarm LED
Alarm LED
This LED when lit (RED) indicates that a primary parameter exceeds alarm limits for the
transmitter on the antenna.
transmitter on the antenna.
Integral Secondary
Alarm LED
Alarm LED
This LED when lit (RED) indicates that a secondary parameter exceeds alarm limits for
the transmitter on the antenna.
the transmitter on the antenna.
Integral Pre-Alarm
LED
LED
This LED when lit (YELLOW) indicates that a primary parameter exceeds pre alarm
limits for the transmitter on the antenna.
limits for the transmitter on the antenna.
Standby Primary
Alarm LED
Alarm LED
Not Used (OFF)
Standby Secondary
Alarm LED
Alarm LED
Not Used (OFF)
Standby Pre-Alarm
LED
LED
Not Used (OFF)
Sync
This is the scope trigger for viewing the Detected Test signals.
Test
This is the detected Test signal from the Monitor.
CPU OK LED
This LED when lit (GREEN) indicates that the Monitor processor is operating normally.