Справочник Пользователя для Digital Security Controls Ltd. 00NB9001
14
Panic Keys Audible is enabled, the system will beep the keypad
three times upon activation and activate the alarm output until a
code is entered or the alarm output times out. Otherwise the
alarm will be completely silent.
three times upon activation and activate the alarm output until a
code is entered or the alarm output times out. Otherwise the
alarm will be completely silent.
NOTE:
The Fire, Auxiliary, Panic keys will operate even if
Keypad Lockout is active (see section 4.13 “Keypad Options”
on page 14).
on page 14).
Fire Keys Enable . . . . . . . . . . . . . . . . . Section [015], Option [1]
Panic Keys Audible . . . . . . . . . . . . . . . Section [015], Option [2]
Fire Bell Continuous . . . . . . . . . . . . . . Section [014], Option [8]
Panic Keys Audible . . . . . . . . . . . . . . . Section [015], Option [2]
Fire Bell Continuous . . . . . . . . . . . . . . Section [014], Option [8]
4.13 Keypad Options
The system can be programmed to ‘lockout’ keypads if a series of
incorrect access code entries are made. After the Number of
Invalid Codes Before Lockout has been reached the system
will lock out the keypad for the
incorrect access code entries are made. After the Number of
Invalid Codes Before Lockout has been reached the system
will lock out the keypad for the
Lockout Duration and log the
event to the event buffer. For the duration of the lockout the sys-
tem will sound an error tone when any key is pressed. The invalid
code counter will be reset every hour.
tem will sound an error tone when any key is pressed. The invalid
code counter will be reset every hour.
To disable Keypad Lockout program the Number of Invalid
Codes Before Lockout as (000).
Codes Before Lockout as (000).
NOTE:
If Keypad Lockout is active, the system cannot be
armed or disarmed with a keyswitch.
If the Keypad Blanking Option is enabled the system will turn
off all lights on the NT9010 if no key is pressed for 30 seconds.
The keys, however, will remain backlit.
off all lights on the NT9010 if no key is pressed for 30 seconds.
The keys, however, will remain backlit.
The system will turn the NT9010 lights back on if entry delay
begins or an audible alarm occurs. If the Code Required to
Restore Blanking Option is enabled, the lights will turn on
begins or an audible alarm occurs. If the Code Required to
Restore Blanking Option is enabled, the lights will turn on
when a valid access code is entered. Otherwise, the lights will
turn on when a key is pressed.
turn on when a key is pressed.
NOTE:
Keypad function keys will still operate when the
keypad is blank, unless the function key is programmed to
require an access code.
require an access code.
The keys of all the keypads can be backlit to provide easy viewing
in dim lighting conditions. If the Keypad Backlighting Option
is enabled the keys will be illuminated.
in dim lighting conditions. If the Keypad Backlighting Option
is enabled the keys will be illuminated.
If the Bypass Status Displayed While Armed option is chosen,
the System light will be ON while the system is armed to indicate
that there are bypassed zones.
the System light will be ON while the system is armed to indicate
that there are bypassed zones.
Number of Invalid Codes Before Lockout . . . . . . . Section [012]
Lockout Duration . . . . . . . . . . . . . . . . . . . . . . . . . Section [012]
Keypad Blanking Option . . . . . . . . . . . Section [016], Option [3]
Code Required to Restore Blanking. . . Section [016], Option [4]
Keypad Backlighting Option . . . . . . . . Section [016], Option [5]
Bypass Displayed While Armed . . . . . . Section [016], Option [7]
Keypad Lockout Reporting Code . . . . . . . . . . . . . Section [338]
Lockout Duration . . . . . . . . . . . . . . . . . . . . . . . . . Section [012]
Keypad Blanking Option . . . . . . . . . . . Section [016], Option [3]
Code Required to Restore Blanking. . . Section [016], Option [4]
Keypad Backlighting Option . . . . . . . . Section [016], Option [5]
Bypass Displayed While Armed . . . . . . Section [016], Option [7]
Keypad Lockout Reporting Code . . . . . . . . . . . . . Section [338]
4.14 Sleep Mode
To conserve the backup battery during the loss of AC power, the
NT9010 control unit will enter “sleep mode” after AC power is
missing for 30 seconds. When the NT9010 is in sleep mode, all
the lights on the unit will turn off, except for the System light,
which will flash.
NT9010 control unit will enter “sleep mode” after AC power is
missing for 30 seconds. When the NT9010 is in sleep mode, all
the lights on the unit will turn off, except for the System light,
which will flash.
The system will “wake up” and run on the backup battery when
any system event occurs, or when a user presses and holds a but-
ton on the unit for 2 seconds.
any system event occurs, or when a user presses and holds a but-
ton on the unit for 2 seconds.