Справочник Пользователя для UTC Fire & Security B.V. NX1700E
NX-1700E Card Reader
7
ACTION
RESULT
P
ROGRAMMING A
L
OCATION
If an attempt is made to program an invalid entry for a particular segment, the
keypad sounder will emit a triple error beep (beep, beep, beep), and remain in
that segment awaiting a valid entry.
keypad sounder will emit a triple error beep (beep, beep, beep), and remain in
that segment awaiting a valid entry.
To Enter a Location:
[location] #
The Armed LED will flash. If the location is valid, the
"Armed" LED will extinguish, the "Ready" LED will
illuminate, and the zone LED’s will show the data for
the first segment of this location.
"Armed" LED will extinguish, the "Ready" LED will
illuminate, and the zone LED’s will show the data for
the first segment of this location.
To Change Location Data:
[changed data]
The "Ready" LED will flash to indicate a data change
in process and will continue until the data is saved.
in process and will continue until the data is saved.
The new data is saved.
The keypad will increment and display the next
segment’s data.
The keypad will increment and display the next
segment’s data.
NOTE: Repeat these steps until the last segment is reached.
To Exit a Location:
#
Exits from this location.
The “Ready” LED will
extinguish. The "Armed" LED will illuminate waiting for
a new programming location to be entered.
a new programming location to be entered.
To Review The Data:
[location] #
The Armed LED will flash. If the location number is
valid, the "Armed" LED will extinguish, the "Ready"
LED will illuminate, and the zone LEDs will show the
binary data for the first segment of this location.
valid, the "Armed" LED will extinguish, the "Ready"
LED will illuminate, and the zone LEDs will show the
binary data for the first segment of this location.
(Do not enter data.)
The next segment is displayed. Each time
r
is
pressed, the data of the next segment will be displayed
for review.
for review.
Shortcuts:
Previous location.
Same location.
Next sequential location.
E
XITING THE
P
ROGRAM
M
ODE
:
EXIT EXIT
Exits this programming level.