Справочник Пользователя для Lectrosonics Inc D4T
D4T/D4R
LECTROSONICS, INC.
6
Front and Rear Panels
Setup and operation of the transmitter and receiver is
a straightforward process using an LCD and push but-
ton interface on the front panels. The Main Window dis-
plays audio levels during operation, with a setup menu
and screens to select operating modes and levels.
The rear panels provide the audio inputs and outputs,
The rear panels provide the audio inputs and outputs,
power receptacle and USB port. Channels 1 and 2
provide balanced analog signals and AES-EBU digital
signals as selected from the LCD setup screens.
Channels 3 and 4 are balanced analog audio only. The
connectors are standard TA3M type.
D4T Transmitter
FUNC
BACK
OFF
ON
1
2
3
4
DIGITAL 4 CHANNEL TRANSMITTER
Channel Select 1-4
Menu Item &
Parameter Select
Return to
Previous
Menu
Press to Enter
Setup Menus
Audio
Level
USB
AES 3/4
1
2
3
4
9-16 VDC
500 mA
AES 1/2
D4T 4-CHANNEL DIGITAL TRANSMITTER
The units are powered with an external source of 9 to
16 VDC, with power consumption of 500 mA for the
transmitter and 250 mA for the receiver.
The USB port is used for firmware updates.
The USB port is used for firmware updates.
D4R Receiver
FUNC
BACK
OFF
ON
1
2
3
4
PHONES
DIGITAL 4 CHANNEL RECEIVER
Channel
Select 1-4
Menu Item/Parameter
Select Buttons
Press to Enter
Setup Menus
Return to
Previous
Menu
Channel selected
for headphone
monitoring
Incoming
RF level
Menu Item &
Parameter Select
Audio
Level
USB
AES 3/4
1
2
3
4
9-16 VDC
300 mA
AES 1/2
D4R 4-CHANNEL DIGITAL RECEIVER