Справочник Пользователя для Telrad Networks Ltd COMPACT2X

Chapter 2 - CommissioningSystem Initial Verification

Chapter 2: Commissioning

System Initial Verification

BreezeCOMPACT System Manual

BreezeCOMPACT System Manual

After power-up, the BTS automatically starts a self-testing procedure to verify that:



The BTS has been correctly assembled and installed on site.



All BTS components are functioning properly.



The BTS is ready for commissioning. 

During the self-test, the LEDs indicate the working status of the various components.



Verify that the BTS is connected to an AC power source. 

Upon completion of the internal test and boot-up (which may take up to 5 minutes), verify that the following LEDs are 

lit, as follows:

Upon power-up completion, the BTS is ready for basic network definition.

PWR Power 

indication



Off: There is no 4*V to the internal main power supply module.



Red: Power is provided to the unit and the internal main power supply 
module is OK.



Green: All the internal digital power supply rails are OK.

ALRM

Alarm indication



Lights at power-up. 



Turns off after power-up is complete.



Lights on runtime in case of critical failure.

GPS

GPS status indication



Lights at power-up.



Turns off after power-up is complete.



Lights when the GPS is reporting at least four satellites or more reception.



Blinks (0.5 seconds on, 0.5 seconds off) when the number of satellites 
decreases from 4 to 3 or 2 satellites or the minimum configured value.



Turns off when only one satellite is received, or the minimum configured 
value for GPS is not operational or not installed.



Lights again when the unit is regaining satellites reception of 4 satellites or 
more.