Справочник Пользователя для Telrad Networks Ltd COMPACT2X

Chapter 3 - Operation and AdministrationGPS Menu

Chapter 3: Operation and Administration

GPS Menu

BreezeCOMPACT System Manual

BreezeCOMPACT System Manual

The GPS menu includes the following options:





The GPS General Configuration menu enables you to view/update the parameters described below.

The type of time synchronization source to be used. The currently available options are None and TrimbleLassen.

The default is TrimbleLassen.

A change in the GPS Type takes effect after the next reset.

The longitude of the site. The format is lll.mmm,a, where lll.is the longitude, in degrees (between 000 to 179), mmm is 

minutes (between 000 and 999) and a is E (east) or W (west). The default is 000.000,E.

This parameter is only configurable if the GPS Type is set to None. Otherwise, it is read-only, and displays the value 

calculated by the GPS receiver.

The latitude of the site. The format is ll.mmm,a, where ll.is the latitude, in degrees (between 00 to 89), mmm is minutes 

(between 000 and 999) and a - is N (north) or S (south). The default is 00.000,N.

This parameter is only configurable if the GPS Type is set to None. Otherwise, it is read-only, and displays the value 

calculated by the GPS receiver.

The altitude, in meters, of the site in meters. Values are from -300.0 to 9000.0. The default is 0.

This parameter is only configurable if the GPS Type is set to None. Otherwise, it is read-only, and displays the value 

calculated by the GPS receiver.