Справочник Пользователя для Nautel Maine Inc VS300
VS300 Operations and Maintenance Manual
Operating the transmitter
Issue 0.1 2011-03-11
Page 2-35
Setting time and date
The VS300’s internal clock uses a backup battery, and therefore maintains an accurate time and date,
even during power outages. The time and date needs to be set when the transmitter is first installed,
or after a power outage if the backup battery has failed.
even during power outages. The time and date needs to be set when the transmitter is first installed,
or after a power outage if the backup battery has failed.
You can set the time and date using the remote AUI (see
) or using the local front
panel display (see
“Using the front panel” on page 2-36
).
Using the AUI
You can remotely set the VS300’s time and date from the AUI’s
Set Time & Date page - see
Figure 2.26
. To view the
Set Time & Date page
, click on the time or date in the upper, left corner of
any AUI page.
Figure 2.26: Set Time & Date page
The
Set Time & Date page
contains editable fields for the date (month, day and year) and time
(hours, minutes and seconds). The clock is displayed in 24-hour format.
Use the up and down buttons to increase or decrease the desired value in the specific field. Click the
OK
button to accept changes or click the
Cancel
button or
X
to discard changes and close the
window.