Справочник Пользователя для Mitsubishi Electric Corp 485
12
Advanced Functions
Note
A point to notice
Info.
Supplementary information
Series Recording 2
Series Recording 2 provides a function: when the first VCR’s tape reaches its end, the
second VCR automatically begins recording. When the tape in second VCR finishes,
the first VCR starts recording again. (The two VCRs keep recording one after another.)
Set both the first and second VCRs as in the steps below.
second VCR automatically begins recording. When the tape in second VCR finishes,
the first VCR starts recording again. (The two VCRs keep recording one after another.)
Set both the first and second VCRs as in the steps below.
1. Repeat steps 1 to 6 of
Series Recording 1.
Steps 3 to 6 must be set to both 1st and 2nd VCRs.
2. Turn the SHUTTLE ring to the left.
•
<MAIN MENU> appears.
3. Turn the JOG dial to select CLOCK/FIRST TIME SET UP
and turn the SHUTTLE ring to the right.
•
<FIRST TIME SET UP> menu appears.
4. Turn the JOG dial to select TAPE END and turn the
SHUTTLE ring to the right.
5. Turn the JOG dial to select REWIND and turn the SHUTTLE
ring to the right.
6. Press the MENU button.
•
The day and present time display appears on screen.
Series Recording 1
Series recording is possible if two or more of these units are connected. When the first
VCR’s tape reaches its end or an error occurs on VCR, the second VCR automatically
begins recording.
VCR’s tape reaches its end or an error occurs on VCR, the second VCR automatically
begins recording.
1. Press the MENU button.
•
<MAIN MENU> appears.
2. Turn the JOG dial to select REAR TERMINAL and turn the
SHUTTLE ring to the right.
•
<REAR TERMINAL> menu appears.
Step 3 and 4 on 1st VCR only:
3. When the cursor (
) is next to CALL OUT, turn the
SHUTTLE ring to the right.
4. Turn the JOG dial to select WRNG•TAPE END and turn the
SHUTTLE ring to the right.
Step 5 and 6 on 2nd VCR only:
5. Turn the JOG dial to select REC IN and turn the SHUTTLE
ring to the right.
6. Turn the JOG dial to select SERIES and turn the SHUTTLE
ring to the right.
7. Press the MENU button.
•
The day and present time display appears on screen.
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
<REAR TERMINAL>
CALL OUT
WRNG
CLOCK OUT
REC- 1
MODE OUT
REC
REC IN
REC-START/STOP
<REAR TERMINAL>
CALL OUT
WRNG
CLOCK OUT
REC- 1
MODE OUT
REC
REC IN
REC-START/STOP
<REAR TERMINAL>
CALL OUT
WRNG•TAPE END
CLOCK OUT
REC- 1
MODE OUT
REC
REC IN
REC-START/STOP
<REAR TERMINAL>
CALL OUT
WRNG
CLOCK OUT
REC- 1
MODE OUT
REC
REC IN
REC-START/STOP
<REAR TERMINAL>
CALL OUT
WRNG
CLOCK OUT
REC- 1
MODE OUT
REC
REC IN
SERIES
•
For series recording connection, go to
page 25.
page 25.
Note
•
Timer or emergency recording
function cannot be used with series
recording at the same time.
function cannot be used with series
recording at the same time.
Recording Techniques
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
STOP
QUASI V-SYNC
ON
VIDEO MODE
COLOR
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
STOP
QUASI V-SYNC
ON
VIDEO MODE
COLOR
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
REWIND
QUASI V-SYNC
ON
VIDEO MODE
COLOR