Справочник Пользователя для Mitsubishi Electric Corp 485

A point to notice

Supplementary information

This VCR includes a built-in backup memory, so the preset day and present time will
remain in memory even if there is a power failure.  However, if the power cord is
disconnected for a long period of time (2-3 months), the present time may not be
accurate.  In this case, set the clock again.

If a power failure occurs during manual, timer, or alarm recording,
the VCR will return to the recording mode when the power comes
back on.  The Power Failure symbol (X) will be displayed for about
1 minute on screen and the Power Loss indicator ( ) will
illuminate on the fluorescent display when the power comes back
on.  If a power failure occurs while the VCR’s power is on, the
VCR will turn on by itself when the power comes back on.

The power failure start time is logged in the VCR’s Power Loss List.  To view the list,
please follow the steps listed below.

1. Press the MENU button.

<MAIN MENU> appears.

2. Turn the JOG dial to select MAINTENANCE and turn the

SHUTTLE ring to the right.
•

<MAINTENANCE> menu appears.

3. Turn the JOG dial to select POWER LOSS LIST and turn the

SHUTTLE ring to the right.
•

<POWER LOSS LIST> appears.

4. Press the MENU button.

•

The day and present time appears on screen.

1. Select POWER LOSS LIST CLEAR in <MAINTENANCE>

menu and turn the SHUTTLE ring to the right.

2. Turn the SHUTTLE ring to the left to clear the list.

•

<MAINTENANCE> menu appears.
To exit the menu without clearing the list, press the
MENU button.

3. Press the MENU button.

•

Once the list is cleared, the Power Loss indicator ( ) will
go off.

The alarm recording start time/date are logged in the VCR’s Alarm List.  To view the
list, please follow the steps listed below.

1. Press the MENU button.

<MAIN MENU> appears.

2. Turn the JOG dial to select MAINTENANCE and turn the

SHUTTLE ring to the right.
•

<MAINTENANCE> menu appears.

3

Turn the JOG dial to select ALARM LIST and turn the
SHUTTLE ring to the right.
•

<ALARM LIST> appears.

4. Press the MENU button.

•

The day and present time appears on screen.

01-01-’02   TUE

00:00:00 X L24

•

The battery is fully charged if the
VCR’s power cord is plugged into an
AC outlet for 40 or more hours per
week.

•

If the battery is fully charged, even if
the power cord is not plugged in, the
following settings will remain in
memory for up to 31 days:
–

The day and present time display

–

Alarm list

–

Power loss list

–

Number of tape uses

–

Counter display

–

Recording/Playback mode

 •

When ALARM REC DURATION of the
RECORDING SET UP menu is set to
MAN1 or MAN2 and a power failure
occurs during the alarm recording, the
VCR may not return to the alarm
recording mode when the power
comes back on.

•

Up to three power failure start times
will be displayed.  If more than three
failures have occurred, the first start
time and the last two start times will
be displayed on the list.

•

Maximum of 9,999 alarm recording
start times will be counted.

•

Up to eight alarm recording start
times will be displayed.  If more than
eight alarm recordings have occurred,
the first start time and the last seven
start times will be displayed on the
list.

  POWER LOSS LIST CLEAR

Turn the SHUTTLE RING

then POWER LOSS LIST

will be cleared.

<ALARM LIST>

0001

01-31-’02

00:00

0002

0003

0004

0005

0006

0007

0008

<POWER LOSS LIST>

01 01-31-’02  00:00

02

03