Справочник Пользователя для Mitsubishi Electric Corp 485
13
Advanced Functions
Reference page
Remote Recording
This function permits you to control the start/end of recording from a remote place. The
VCR starts recording while the REC IN terminal is grounded.
VCR starts recording while the REC IN terminal is grounded.
1. Display <REAR TERMINAL> menu.
2. Set REC IN to REC-START/STOP.
3. Press the MENU button.
•
The day and present time display appears on screen.
Repeat Recording
With this function, when the tape reaches its end during recording, the VCR rewinds the
tape and starts recording again.
tape and starts recording again.
1. Press the MENU button.
•
<MAIN MENU> appears.
2. Turn the JOG dial to select CLOCK/FIRST TIME SET UP
and turn the SHUTTLE ring to the right.
•
<FIRST TIME SET UP> menu appears.
3. Turn the JOG dial to select TAPE END and turn the
SHUTTLE ring to the right.
4. Turn the JOG dial to select REPEAT or ALARM•PROT and
turn the SHUTTLE ring to the right.
Refer to the table below for REPEAT and ALARM•PROT.
Repeat indicator (
Repeat indicator (
) illuminates on the fluorescent display.
5. Press the MENU button.
•
The day and present time display appears on screen.
When the tape reaches its end during recording
The following functions are automatically engaged when the tape ends during recording.
* To repeat recording on the same tape again, eject the tape and reinsert.
<REAR TERMINAL>
CALL OUT
WRNG•TAPE END
CLOCK OUT
REC- 1
MODE OUT
REC
REC IN
REC-START/STOP
TAPE END setting
REPEAT
REWIND
ALARM•PROT
STOP
The tape stops.
When there are alarm recordings on tape
When there is NO alarm recording on tape
The tape stops.(*)
The tape is rewound automatically to the beginning and
then recording is resumed.
then recording is resumed.
The tape is rewound automatically to the beginning (except in timer recording) and then stops.
The tape is rewound automatically to the beginning and then recording is resumed (also recording
over existing alarms).
over existing alarms).
•
For remote recording connection, go
to page 25.
to page 25.
Note
•
An index signal will not be recorded
during remote recording.
during remote recording.
•
Series or timer recording function
cannot be used with remote recording
at the same time.
cannot be used with remote recording
at the same time.
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
STOP
QUASI V-SYNC
ON
VIDEO MODE
COLOR
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
STOP
QUASI V-SYNC
ON
VIDEO MODE
COLOR
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END
REPEAT
QUASI V-SYNC
ON
VIDEO MODE
COLOR