Справочник Пользователя для Mitsubishi Electric Corp 485

A point to notice

Supplementary information

Illuminates during the counter memory stop.

Illuminates when the VCR is turned on after a power
failure occurs during recording.

Flashes during alarm recording and stays on when the
alarm recording is finished.

Flashes when recording an index signal and
illuminates during the index number setup and the
index search. (Index number is shown on the
Recording and Playback Mode display.)

Illuminates during the skip search.

Illuminates when “DAYLIGHT SAVINGS” is set to “ON.”

Indicates the tape speed.
SP is standard play; EP is extended play.

Illuminates when “TAPE END” in “FIRST TIME SET
UP” menu is set to “REPEAT” or “ALARM•PROT.”

Illuminates when a tape is inserted.  The light
advances, stops, or flashes corresponding to the
movement of the tape.

Illuminates when the VCR is in stand-by for timer
recording or during timer recording.

Counter/Clock display
While the VCR is turned on, indicates the relative
position on the tape. (The Counter stops counting
where no recording is made on the tape.)  When it is
off, (when set) the clock (24-hour format) is shown.

Recording and Playback Mode/Index Number
display
Displays the number corresponding to a selected
recording or playback mode.  Also, displays the index
number during the index number setup and the index
search.

Illuminates when “EMERGENCY REC” in
“RECORDING SET UP” menu is set to “ON.”

Illuminates when the lock feature is in use.

Illuminates during playback.

Illuminates during recording.