Справочник Пользователя для etatronix GmbH EXM10RXLINK
exm10Rx
Integration Manual
Integration Manual
2.2 Mounting
Figure
shows two possible examples for the mounting of the exm module. Using the
provided holes, the module can be mounted on a separate carrier (a) or on the surface
which faces the power coil (b). In order to fit onto the module, the screw-head should
have a maximum diameter of 5.5mm. The height of the standoffs should be at least
6mm.
6mm.
(a) Carrier Mounting
(b) Surface Mounting
Figure 2:
Mounting Examples
exm10Rx-Integration Manual-Draft-01.pdf
, August 2018
5 / 10